PRIMARY AND SECONDARY SHEAVES 3.Apply: BEL-RAY assembly lube ® (to the guide pin sliding groove 1 , and O- ring 2 ) New 4.Install: Spring seat Compression spring Spring seat Nut ***************************************************** Installing steps: Attach the sheave fixed block, locknut wrench and sheave spring compressor to the secondary sheave assembly. Sheave fixed block: P/N. YM-04135, 90890-04135 Locknut wrench: P/N. 90890-01348 Sheave spring compressor: P/N. YM-04134, 90890-04134 Place the sheave fixed block in a vise and secure it. Tighten the sheave spring compressor nut 1 and compress the spring. Install the nut 2 and tighten it to the speci- fied torque using the locknut wrench.
Remove the sheave spring compressor, locknut wrench, and sheave fixed block. ***************************************************** 4 - 58 ENG R. T. Nut: 90 Nm (9.0 m • kg, 65 ft • lb)