2.Check: Clutch shoe Heat damage Replace. 3.Measure: Clutch shoe thickness Out of specification Replace. Clutch shoe thickness: 1.5 mm (0.06 in) Clutch shoe wear limit a : 1.0 mm (0.04 in) INSTALLING THE CLUTCH 1.Install: Collar Clutch carrier assembly Use a clutch holding tool 2 to hold the clutch carrier assembly. 2.Lock the threads with a drift punch. 3.Install: One-way clutch bearing NOTE: The one-way clutch bearing should be installed in the clutch carrier assembly with the arrow mark a facing toward the clutch hous- ing. 4 - 63 CLUTCH ENG New R. T. 160 Nm (16.0 m • kg, 115 ft • lb) NOTE: Clutch holding tool: P/N. YM-91042, 90890-04086