Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CRANKCASE И SEPARATING THE CRANKCASE 1.Separate: Left crankcase Right crankcase ***************************************************** Separation steps: Remove the crankcase bolts. NOTE: Loosen each bolt 1/4 of a turn at a time and after all the bolts are loosened, remove them. Й Loosen the bolts in stages, using a criss- cross pattern. И Left crankcase Й Right crankcase Remove the left crankcase. CAUTION: Use a soft hammer to tap on one side of the crankcase. Tap only on reinforced portions of the crankcase. Do not tap on the crank- case mating surfaces. Work slowly and carefully. Make sure that the crankcase halves separate evenly. Remove the dowel pins.

***************************************************** CHECKING THE TIMING CHAIN AND GUIDE 1.Check: Timing chain Cracks/stiff Replace the timing chain and camshaft sprocket as a set. 2.Check: Intake side timing chain guide Wear/damage Replace. CHECKING THE OIL DELIVERY PIPE 1.Check: Oil delivery pipe Cracks/damage Replace. Clogged Blow out with compressed air. 4 - 69 ENG