Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE CRANKCASE 1.Thoroughly wash the case halves in a mild solvent. 2.Clean all the gasket mating surfaces and crankcase mating surfaces thoroughly. 3.Check: Crankcase Cracks/damage Replace. Oil delivery passages Clogged Blow out with compressed air. CHECKING THE BEARINGS 1.Check: Bearing Clean and lubricate, then rotate the inner race with a finger. Roughness Replace. ASSEMBLING THE CRANKCASE 1.Apply: Sealant (Quick Gasket ® ) 1 (to the mating surfaces of both case halves) Sealant (Quick Gasket ® ): P/N. ACC-11001-05-01 Yamaha bond No. 1215: P/N. 90890-85505 2.Install: Dowel pin 2 3.Fit the left crankcase onto the right case. Tap lightly on the case with a soft hammer. CAUTION:

Before installing and torquing the crank- case holding bolts, be sure to check whether the transmission is functioning properly by manually rotating the shift cam in both directions. 4 - 70 CRANKCASE ENG