Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

2.Remove: Nut 1 Washer Universal joint yoke NOTE: Use the universal joint holder 2 to hold the universal joint yoke. 3.Remove: Nut 1 Washer Coupling gear 2 NOTE: Use the coupling gear/middle shaft tool 3 to hold the coupling gear. 4.Remove: Bearing housing assembly 1 ***************************************************** Removal steps: Clean the outside of the middle driven shaft. Place the middle driven shaft onto a hydrau- lic press. CAUTION: Never directly press the shaft end with a hydraulic press, this will result in damage to the shaft thread. Install the suitable socket 2 on the shaft end to protect the thread from damage. Press the shaft end and remove the bearing housing.

***************************************************** 4 - 89 MIDDLE GEAR ENG Universal joint holder: P/N. YM-04062 Coupling gear/middle shaft tool P/N. YM-01230,90890-0229