Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

MIDDLE GEAR CHECKING THE PINION GEAR 1.Check Gear teeth (drive pinion gear) 1 Gear teeth (driven pinion gear) 2 Pitting/galling/wear Replace. 2.Check O-ring Damage Replace. Bearings Pitting/damage Replace. 3.Check: U-joint movement Roughness Replace U-joint. MIDDLE DRIVE AND DRIVEN GEAR SHIM SELECTION When the drive and driven gear, bearing hous- ing assembly and/or crankcase replaced, be sure to adjust the gear shim 1 and 2 . 1.Select: Middle drive gear shim 1 Middle driven gear shim 2 ***************************************************** Selection steps:

Position middle drive and driven gear by using shims 1 and 2 with their respective thickness calculated from information marked on crankcase, bearing housing and drive gear end. 1 Shim thickness “A” 2 Shim thickness “B” To find shim thickness “A” use following for- mula: Middle drive pinion gear shim thickness: a + d b c 4 - 91 ENG