Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

Where: a = a numeral (usually a decimal number) on the bearing housing is either added to or subtracted from “7.5”. b = 17.0 c = 55.0 d = a numeral (usually a decimal number) on the right crankcase specifies a thickness of “64.98”. Example: 1) If the bearing housing is marked “+02”, ..... a is 7.52, 2) b is 17 3) c is 55 4)If the crankcase (right) is marked “64.98”, ..... d is 64.98. 5) Therefore, the shim thickness is 0.50 mm. A = 7.52 + 64.98 – 17 – 55 = 0.50 6) Round off hundredths digit and select appropriate shim(s). In the example above, the calculated shim thickness is 0.50 mm. The chart instructs you, however, to round off 0 to 0. Shims are supplied in the following thickness.

4 - 92 MIDDLE GEAR ENG Hundredths Round value 0, 1, 2 0 3, 4, 5, 6, 7 5 8, 9 10 Middle drive pinion gear shim Thickness (mm) 0.10 0.30 0.15 0.40 0.20 0.50