Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

MIDDLE GEAR MEASURING THE MIDDLE GEAR BACKLASH 1.Measure: Gear lash ***************************************************** Measurement steps: Temporary install the right crankcase. Wrap a rag 2 around a screwdriver 3 , and then insert it into the installation hole 1 of the left crankcase speed sensor to hold the middle driven gear. Attach the gear lash measurement tool 3 and dial gauge 4 . a 46 mm (1.8 in) Measure the gear lash while rotating the mid- dle driven shaft back and forth. NOTE: Measure the gear lash at 4 positions. Rotate the middle driven gear 90° each time.

If the gear lash is incorrect, adjust the gear lash by middle driven pinion gear shims and/ or middle drive pinion gear shim(s). ***************************************************** 4 - 97 ENG Middle gear lash: 0.1 ~ 0.3 mm (0.004 ~ 0.012 in) Gear lash measurement tool: P/N. YM-01467, 90890-01467