FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR DISASSEMBLING THE UNIVERSAL JOINT 1.Remove: Universal joint ***************************************************** Removal steps: Remove the circlips 1 . Place the U-joint in a press. With a suitable diameter pipe 2 beneath the yoke 3 , press the bearing 4 into the pipe as shown. NOTE: It may be necessary to lightly tap the yoke with a punch. Repeat the steps for the opposite bearing. Remove the yoke. NOTE: it may be necessary to lightly tap the yoke with a punch. ***************************************************** 2.Remove: Universal joint yoke Use a universal joint holder 1 . 7 - 9 DRIV DRIV Universal joint holder: P/N.
YM-04062, 90890-04062