REMOVING THE RING GEAR 1.Remove: Ring gear 1 NOTE: The ring gear and the differential gear cover should be fastened together. Do not disassem- ble the differential gear. CAUTION: The differential gears are assembled into a proper unit at the factory by means of spe- cialized equipment. Do not attempt to dis- assemble this unit. Disassembly will result in the malfunction of the unit. CHECKING THE CONSTANT VELOCITY JOINT 1.Check: Double off-set joint spline Ball joint spline Shaft spline Wear/damage Replace. 2.Check: Dust boots Cracks/damage Replace. CAUTION: Always use a new boot band. 3.Check: Balls and ball races Inner surface of double off-set joint Pitting/wear/damage Replace.
CHECKING THE DIFFERENTIAL GEAR 1.Check: Gear teeth Pitting/galling/wear Replace drive pinion gear and ring gear as a set. Bearing Pitting/damage Replace. Oil seal O-ring Damage Replace. 7 - 10 FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR DRIV DRIV