2.Check: Drive shaft splines Universal joints Front drive gear splines Wear/damage Replace. Spring Fatigue Replace. Move the spring up and down. 3.Check: Front drive shaft Bends Replace. WARNING Do not attempt to straighten a bent shaft; this may dangerously weaken the shaft. И CHECKING THE GEAR MOTOR 1.Check: Gear motor ***************************************************** Checking steps: Connect two C size batteries to the gear motor terminals 1 . (as shown illustration) CAUTION: Do not use a 12 V battery to operate the pinion gear. Й И Check that the pinion gear 2 turns counter- clockwise. Й Check that the pinion gear 2 turns clockwise. NOTE:
Be sure not to disassemble gear motor and remove the pinion gear. ***************************************************** ASSEMBLING THE FRONT CONSTANT VELOCITY JOINT 1.Apply: Molybdenum disulfide grease (into the ball joint assembly) NOTE: Molybdenum disulfide grease is included in the repair kit. 7 - 11 FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR DRIV DRIV