Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

2.Install: Dust boots 1 Boot bands 2 , 3 New ***************************************************** Installation steps: Apply molybdenum disulfide grease into the dust boots. Install the dust boots. Install the dust boot bands. NOTE: The new boot bands may differ from the orig- inal ones. The dust boots should be fastened with the boot bands 3 at the grooves in the joint shaft. ***************************************************** 3.Check: Free play (thrust movement) Excessive play Replace the joint assem- bly. ASSEMBLING THE DIFFERENTIAL GEAR 1.Measure: Gear lash Refer to “MEASURING AND ADJUSTING THE DIFFERENTIAL GEAR LASH”. 2.Install:

Gear motor 7 - 12 FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR DRIV DRIV Molybdenum disulfide grease: 40 g (1.4 oz) per dust boot