FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR Adjusting differential gear lash 1.Remove: Shim(s) (left) 1 Differential gear assembly 2 Shim(s) (right) 3 2.Adjust: Gear lash ***************************************************** Adjustment steps: Select the suitable shims using the following chart. If it is necessary to increase by more than 0.05 mm (0.002 in): Reduce right shim thickness by 0.1 mm (0.004 in) for every 0.1 mm (0.004 in) of left shim increase. If it is necessary to reduce by more than 0.1 mm (0.004 in): Increase right shim thickness by 0.1 mm (0.004 in) for every 0.1 mm of left shim decreased. 7 - 16 DRIV DRIV Too little gear lash Reduce shim thick- ness.
Too large gear lash Increase shim thick- ness. Ring gear shim (left and right) Thickness (mm) 0.1 1.0 0.2 1.5 0.3 2.0 0.4 2.5 0.5