REAR CONSTANT VELOCITY JOINT/FINAL DRIVE GEAR AND DRIVE SHAFT ASSEMBLING THE FINAL DRIVE GEAR 1.Adjust: Final gear lash Refer to “MEASUREMENT AND ADJUST- ING THE FINAL GEAR LASH”. 2.Check: Final drive gear operation Unsmooth operation Replace the final drive gear assembly. Insert the double off-set joint into the final drive gear, and turn the gear back and forth. INSTALLING THE FINAL DRIVE GEAR 1.Lubricate: Drive shaft Coupling gear O-ring Oil seal Bearing 2.Install: Drive shaft Coupling gear 3.Install: Final drive gear Nuts 7 - 32 DRIV DRIV Recommended lubricant: Yamaha Grizzly grease R. T. 55 Nm (5.5 m • kg, 40 ft • lb)