Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CAUTION: Disc brake components rarely require dis- assembly. DO NOT: disassemble components unless abso- lutely necessary; use solvents on internal brake compo- nents; use spent brake fluid for cleaning; (use only clean brake fluid) allow brake fluid to come in contact with the eyes, as this may cause eye injury; splash brake fluid onto painted surfaces or plastic parts, as this may cause damage; disconnect any hydraulic connection, as this would require the entire brake sys- tem to be disassembled, drained, cleaned, properly filled and bled after reassembly. REPLACING THE FRONT BRAKE PAD NOTE: It is not necessary to disassemble the brake caliper and brake hose to replace the brake pads.

1.Measure: Brake pad wear limit a Out of specification Replace the brake pad as a set. 2.Install: Brake pads Brake pad spring NOTE: Always install new brake pads, brake pad shim and brake pad spring as a set. 8 - 12 FRONT AND REAR BRAKES CHAS Brake pad wear limit: 1 mm (0.04 in)