Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

EB801020 CHECKING THE BULBS AND BULB SOCKETS Check each bulb and bulb socket for damage or wear, proper connections, and also for con- tinuity between the terminals. Damage/wear Repair or replace the bulb, bulb socket or both. Improperly connected Properly connect. Incorrect continuity reading Repair or replace the bulb, bulb socket or both. TYPES OF BULBS The bulbs used on this motorcycle are shown in the illustration on the left. Bulbs A and B are used for headlights and usually use a bulb holder which must be detached before removing the bulb. The majority of these bulbs can be removed from their respective socket by turning them coun- terclockwise.

Bulb C is used for turn signal and brake/tail lights and can be removed from the socket by pushing and turning the bulb counter- clockwise. Bulbs D and E are used for meter and indi- cator lights and can be removed from their respective socket by carefully pulling them out. CHECKING THE CONDITION OF THE BULBS The following procedure applies to all of the bulbs. 1.Remove: Bulb 9 - 6 CHECKING THE BULBS AND BULB SOCKETS ELEC – +