* C0NTINUITY 9.Pickup coil resistance Disconnect the AC magneto coupler from the wire harness. Connect the pocket tester ( ΩЧ 100) to the pickup coil terminal. Tester (+) lead White/Red terminal 1 Tester (–) lead White/Green terminal 2 10.Charging/rotor rotation direction detec- tion coil resistance Disconnect the AC magneto coupler from the wire harness. Connect the pocket tester ( ΩЧ 100) to the charging/rotor rotation direction detection coil terminal. Tester (+) lead Red terminal 1 Tester (–) lead White/Blue terminal 2 * 9 - 13 IGNITION SYSTEM ELEC – + 8.Main switch INCORRECT Refer to “CHECKING THE SWITCH”. CORRECT Replace the main switch.
Check the pickup coil for the specified ● resistance. OUT OF SPECIFICATION Pickup coil resistance: 459 ~ 561 Ω at 20 °C (68 °F) (White/Red – White/Green) Replace the pickup coil/stator assembly. Replace the pickup coil/stator assembly. MEETS SPECIFICATION Check the charging/rotor rotation direction ● detection coil for the specified resistance. OUT OF SPECIFICATION Replace the pickup coil/stator assembly. Replace the pickup coil/stator assembly. MEETS SPECIFICATION