Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

EB804010 TROUBLESHOOTING IF THE BATTERY IS NOT CHARGED: Procedure Check: 1.Fuse (main) 2.Battery 3.Charging voltage 4.Charging coil resistance 5.Wiring connections (the entire charging system) NOTE: Remove the following part(s) before trouble- shooting: 1)Seat 2)Fuel tank side panels Inductive tachometer: P/N. YU-8036-A Engine tachometer: P/N. 90890-03113 Pocket tester: P/N. YU-03112, 90890-03112 Use the following special tool(s) for trouble- shooting. EB802011 EB802012 CORRECT EB804011 3.Charging voltage Connect the engine tachometer to the spark plug lead #1. Connect the pocket tester (DC 20 V) to the battery.

Tester (+) lead Battery (+) terminal Tester (–) lead Battery (–) terminal 9 - 25 CHARGING SYSTEM ELEC – + 1.Fuse (main) NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the fuse. Replace the fuse. 2.Battery INCORRECT Check the battery condition. ● Refer to “CHECKING THE BATTERY” in CHAPTER 3. Clean the battery terminals. ● Recharge or replace the battery. ● Clean the battery terminals. ● Recharge or replace the battery. ● Open-circuit voltage: 12.8 V or more at 20 °C (68 °F)