SIGNAL SYSTEM 3.If the park indicator light fails to come on: 1.Park indicator light LED Check the LED of the park indicator light. Refer to “CHECKING THE LEDs”. NO CONTINUITY CONTINUITY Replace the meter assembly. 3.Voltage Connect the pocket tester (DC 20 V) to the bulb socket coupler. Tester (+) lead Red/White terminal 1 Tester (–) lead Blue/Red terminal 2 This circuit is not faulty. 9 - 38 ELEC – + 2.Gear position switch NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the gear position switch. Replace the gear position switch. Turn the main switch to “ON”. ● Check the voltage (12 V). ● OUT OF SPECIFICATION MEETS SPECIFICATION