SIGNAL SYSTEM 4.If the high-range indicator light fails to come on: 1.High-range indicator light LED Check the LED of the high-range indicator light. Refer to “CHECKING THE LEDs”. NO CONTINUITY Replace the meter assembly. CONTINUITY 3.Voltage Connect the pocket tester (DC 20 V) to the bulb socket coupler. Tester (+) lead Red/White terminal 1 Tester (–) lead Blue/White terminal 2 This circuit is not faulty. 9 - 39 ELEC – + 2.Gear position switch NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the gear position switch. Turn the main switch to “ON”. ● Check the voltage (12 V). ● OUT OF SPECIFICATION MEETS SPECIFICATION