Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

SIGNAL SYSTEM 6.If the reverse indicator light fails to come on: 1.Reverse indicator light LED Check the LED of the reverse indicator light. Refer to “CHECKING THE LEDs”. NO CONTINUITY CONTINUITY Replace the meter assembly. 3.Voltage Connect the pocket tester (DC 20 V) to the bulb socket coupler. Tester (+) lead Red/White terminal 1 Tester (–) lead Green/Blue terminal 2 bulb socket connector is faulty, repair it. Replace the CDI unit. 9 - 41 ELEC – + 2.Reverse switch NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the reverse switch. CONTINUITY Turn the main switch to “ON”. ● Check the voltage (12 V). ● OUT OF SPECIFICATION MEETS SPECIFICATION