TROUBLESHOOTING IF THE FAN MOTOR DOES NOT MOVE: Procedure Check: 1.Fuse (main) 2.Battery 3.Main switch 4.Fan motor 5.Circuit breaker (fan motor) 6.Thermo switch 2 7.Wiring connection (the entire cooling system) NOTE: Remove the following part(s) before trouble- shooting. 1)Seat 2)Front carrier 3)Front fender Use the following special tool(s) for trouble- shooting. EB802011 EB802012 * 9 - 48 COOLING SYSTEM ELEC – + Pocket tester: P/N. YU-03112, 90890-03112 1.Fuse (main) NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the fuse. Replace the fuse. 2.Battery INCORRECT Check the battery condition. ● Refer to “CHECKING THE BATTERY” in CHAPTER 3. Clean the battery terminals.
● Recharge or replace the battery. ● Clean the battery terminals. ● Recharge or replace the battery. ● Open-circuit voltage: 12.8 V or more at 20 °C (68 °F) CORRECT INCORRECT 3.Main switch Refer to “CHECKING THE SWITCH”. CORRECT Replace the main switch. Replace the main switch.