Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

2WD/4WD SELECTING SYSTEM * C0NTINUITY CONTINUITY Replace the on-command four-wheel drive switch and differential gear lock switch. CORRECT * 9 - 55 ELEC – + 6.Four-wheel drive relay 3 NO CONTINUITY Remove the four-wheel drive relay 3 from ● the wire harness. Connect the pocket tester (Ω × 1) and the ● battery (12 V) to the four-wheel drive relay 3 terminals. Tester (+) lead → Brown/Red terminal 1 Tester (–) lead → Yellow/Black terminal 2 Battery (+) terminal → Brown/Red terminal 1 Battery (–) terminal → Yellow/Black terminal 2 Tester (+) lead → Blue/Red terminal 3 Tester (–) lead → Gray terminal 4 Check the four-wheel drive relay 3 for con- ● tinuity. Replace the four-wheel drive relay 3.

Replace the four-wheel drive relay 3. 7.On-command four-wheel drive switch and differential gear lock switch INCORRECT Refer to “CHECKING THE SWITCH”.