2WD/4WD SELECTING SYSTEM * C0NTINUITY EB803028 9 - 56 ELEC – + 8.Gear motor È É INCORRECT È Disconnect the gear motor coupler. ● Remove the gear motor from the differen- ● tial gear case. Refer to “FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR” in CHAPTER 7. Connect two C size batteries to the gear ● motor terminals 1 (as shown illustrations). È Check that the pinion gear 2 turns counter- clockwise. É Check that the pinion gear 2 turns clockwise. Make sure that the drive gear (shift fork ● sliding gear) operates correctly. NOTE: When installing the differential gear case in the gear motor, refer to “FRONT CONSTANT VELOCITY JOINTS AND DIFFERENTIAL GEAR” in CHAPTER 7.
CORRECT Replace the gear motor. 9.Wiring connection POOR CONNECTION Check the connections of the entire 2WD/ ● 4WD selecting system. Refer to “CIRCUIT DIAGRAM”. CORRECT Properly connect the 2WD/4WD selecting system. Replace the meter assembly. Properly connect the 2WD/4WD selecting system. Replace the meter assembly.