ADJUSTING THE SPEED LIMITER 2.Adjust: Speed limiter length ***************************************************** Adjustment steps: Loosen the locknut 1 . Turn the adjuster 2 in or out until the speci- fied speed limiter length is obtained. Tighten the locknut. WARNING Particularly for a beginner rider, the speed limiter should be screwed in com- pletely. Screw it out little by little as their riding technique improves. Never remove the speed limiter for a beginning rider. For proper throttle lever operation do not turn out the adjuster more than 12 mm (0.47 in). Also, always adjust the throttle lever free play to 3 ~ 5 mm (0.12 ~ 0.20 in).
***************************************************** 3 - 20 CHK ADJ CHK ADJ Turning in Speed limiter length is decreased. Turning out Speed limiter length is increased.