Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN INSIDE OF COOLING SYSTEM WARNING The coolant has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours. Komatsu Supercoolant (AF-NAC) is strongly recommended wherever available. 4 - 20 Immediately after th e engine i s stopped, t he coolant is a t a high temperatur e and th e radiator is under high internal pressure.

If the cap is r emove d to drain t he coolant in this condition , there is a hazard o f burns . Wait for the temperatur e to go down, then turn t he cap slowly to release the pressur e before remov ing it.

When starti the lock movin For de tails o f startin g the engi ne, see "BEFORE STARTIN G ENGINE (PAGE 3 -75)" an d "STARTING ENGINE ( PAGE 3-98)" i n the OPERATION sectio There is danger of t ouching th e fan if the undercover is left removed Never enter behind the machi ne when the engine is runn ck position to prevent the machine from Stop th e machine o n level gr ound when cleaning or changing the Clean t he inside of t he coolin g system, change the c oolant according to the table below. Antifreeze coolant Interval for cleaning inside of cooling system and changing antifreeze coolant Komatsu supercoolant (AF-NAC) Every two years or every 4000 hours whichever comes first