Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant between 30% and 68%. Supercoolant (AF-NAC) is already diluted with distilled water. When using coolant, investigate the lowest ° F) lbelow the actual temperature.

Coolant density table WARNING the (4) on the radiator side and drain 4 - 21 temperatures in the past and de cide the density for the coolan t from the coolant density ta Whe The coolant density varies acco rding to the ambient temperat ure, but it must always be a °C Ab Minimum Temp °F A ove -10 -15 -20 - 25 -30 -35 - 40 -45 -50 bove 14 5 -4 - 13 -22 -31 - 40 -49 -58 Concentration (%) 30 36 41 46 50 54 5 8 61 64 Antifreeze is toxic. When open th e drain valve, be careful not to ge t water containing antifreeze on you. If it gets in your eyes, flush your eyes with large amou nt of fresh water and see a doctor at once.

When changing the coolant or dr aining the coolant from the radiat or before carrying out repairs, a sk a specialist company to handle any coolant containing antifreeze, or contact your Komatsu distributor. Antifreeze is toxic, so never pour it into t onto the ground surface. drainage water ditches or drain i The coolant is already diluted w ith distilled water. (For details of the distilled water, see "C OOLANT AND WATER FOR DILUTION (PAGE 4-5)". C heck the density with a coola nt tester. Prepare a container whose cap acity is larger than the specifie d coolant volume to catch d Prepare a hose to use when filli 1. Stop the machine on level ground, then stop the engine.

ter temperature has gone d 2. Remove cover (2). Check that the cooling wa 3. enough to make it possible t o touch the radiator cap surfac hand, then turn radiator ca p (3) slowly until it contacts ure. stopper to release the press 4. Following this, push radiato r cap (3), turn it until it contacts stopper, then remove it. 5. valve cover (5) on the engin