89 PERIODIC SERVICE B Replacing Slow-Blow Fuses The slow-blow fuses are intended to protect the electrical cabling. If any of them has blown out, be sure to pinpoint the cause. Never use any substitute, use only a KUBOTA genuine part. C Replacement procedure [100 Amp. Slow-blow fuse] 1. Disconnect the negative cord of the battery. 2. Remove the vinyl tape on the wire harness. 3. Detach the slow blow fuse case cap. (1) Cover (2) Bolt (3) Slow-blow fuse B Replacing Light Bulb (1) Vinyl tape (2) Slow blow fuse case cap 4. Pull out the slow-blow fuse assy from the fuse case. (1) Slow blow fuse assy (2) Fuse case 5. Open the cover, remove the bolts and draw out the slow-blow fuse.
Light Capacity Head light 12V, 55 / 60 W (H4) Turn signal / hazard light (Front) 12V, 21 W Turn signal / hazard light (Rear) 12V, 21 W Brake stop light / Tail light 12V, 21 / 5 W Front work light 12V, 21 W Work light (for outer roof) 12V, 55 W Dome light (room lamp) 12V, 5 W Front position light 12V, 10 W Number plate light 12V, 10 W