23 OPERATING THE TRACTOR 6. Selecting the Travel Speed. (1) Hydraulic - shuttle shift lever (2) Main gear shift lever (3) Range gear shift lever (F) "FORWARD (N) "NEUTRAL POSITION" (R) "REVERSE" "LOW" "HIGH" "CREEP" By combination of using the main gear shift lever, the range gear shift lever and hydraulic-shuttle shift lever, forward speeds and reverse speeds shown in the table below are obtained. B Range Gear Shift Lever The range gear shift can only be shifted when the tractor is completely stopped and the clutch is depressed. A To avoid transmission damage, depress clutch pedal and stop the tractor before shifting between ranges.
B Hydraulic-Shuttle Shift Lever Raise up and shift the shuttle shift lever forward to obtain forward speeds and shift back to obtain reverse speeds. This shifting does not require clutch operation. B Main Gear Shift Lever The main gear shift is fully synchronized to shift without stopping. A The main gear shift may be shifted between speeds on-the-go, but the clutch must be depressed. A The hydraulic-shuttle shift lever may be shifted while the tractor is moving slowly. Standard model 15 forward speeds 15 reverse speeds POWER KRAWLER(TM) model 12 forward speeds 12 reverse speeds