Kubota — Rear Ballast

TIRES, WHEELS AND BALLAST 48 BALLAST B Rear Ballast Add weight to rear wheels if needed to improve traction or for stability. The amount of rear ballast should be matched to job and the ballast should be removed when it is not needed. The weight should be added to the tractor in the form of liquid ballast, rear wheel weights or a combination of both. To avoid personal injury or death: A Additional ballast will be needed for transporting heavy implements. When the implement is raised, drive slowly over rough ground, regardless of how much ballast is used. A Do not fill the front wheels with liquid to maintain steering control.

C Rear Wheel Weights (option) The rear wheel weights can be attached to the rear wheel. See your implement operator's manual for required number of weights or consult your local KUBOTA Dealer to use. B Front Ballast Add weights if needed for stability and improve traction. Heavy pulling and heavy rear mounted implements tend to lift front wheels. Add enough ballast to maintain steering control and prevent tip over. Remove weight when no longer needed. C Front End Weights (option) The front end weights can be attached to the bumper. See your implement operator's manual for required number of weights or consult your local KUBOTA Dealer to use. (1) Rear wheel weights A Do not overload tires.

A Add no more weight than indicated in chart. (1) Front end weights (2) Bumper A Do not overload tires. A Add no more weight than indicated in chart. A Do not attach the front bumper when the front loader is attached. Maximum weight per wheel 40 kg x 2 pieces Maximum weight 45 kg x 10 pieces