CAB OPERATION 54 A With the blower switch at the "OFF" position, the indicator light will not light up even when the air conditioner switch is set to "ON". C Cooling or dehumidifying-heating 1. Set the mode switch to the position. 2. Set the recirculation / fresh air selection lever to the "FRESH AIR" position. To lower the temperature in the CAB quickly, set this lever to the "RECIRCULATION" position. 3. Press and turn on the air-conditioner switch with indicator. 4. Turn on the blower (1/2/3) switch. 5. Adjust the temperature control dial to the "COOL" or an intermediate position to achieve a comfortable temperature level.
A To operate the air conditioner after the tractor has not been used for one week or longer, run the engine at idling speed first and then set the air conditioner switch to "ON". Keep this for one minute or so. If the air conditioner switch is set to "ON" with the engine running at high rpm, the compressor may get in trouble. B Operation C Heating 1. Set the mode switch to the , or position. 2. Set the recirculation / fresh air selection lever to the "FRESH AIR" position. To raise the temperature in the CAB quickly, set this lever to the "RECIRCULATION" position. 3. Adjust the blower (1/2/3) switch and the temperature control dial to achieve a comfortable temperature level.
A In summer when the heater is not used, keep the temperature control dial at the max "COOL" (end of counterclockwise) position. Otherwise, hot air will raise the temperature in the CAB. (1) Mode switch (2) Temperature control dial (3) Blower switch (4) Air conditioner switch with indicator light (A) "WARM" (B) "COOL" (1) Mode switch (2) Blower switch (3) Temperature control dial