Kubota — Cleaning Fresh Air Filter

PERIODIC SERVICE 76 C How to attach and detach the push-rivet assy. A Detaching procedure B Cleaning Fresh Air Filter Remove the knob bolts and pull out filter. (1) Center-rivet (A) Push in the center-rivet. (B) Pull out the push-rivet assy. (1) Fresh air filter (2) Cover (3) Knob bolt (A) Air inlet port A Attaching procedure A Attach the filter and cover as the illustration above. C Cleaning the air filter A Normal use Blow air from the opposite direction to the filter's normal air flow. Pressure of compressed air must be under 205 kPa (2.1 kgf/cm , 30 psi). A Do not hit the filter.

If the filter becomes deformed, dust may enter into the air-conditioner, which may cause damage and malfunction. (A) Pull out the center-rivet. (B) Attach the push-rivet assy. (C) Push up the center-rivet. (A) "AIR CONDITIONER AIRFLOW" A If the filter is very dirty: Dip the filter in lukewarm water with mild dish washing detergent. Move it up and down as well as left and right to loosen dirt. Rinse the filter with clean water and let it air-dry.