STRUCTURE AND FUNCTION MAIN CONTROL VALVE Boom spool at LOWER position Operation ! When the work equipment control lever is pushed, boom spool (4) is pushed in to the LOWER position. ! The oil from the pump flows through the bypass circuit of the bucket spool and flows to the bypass circuit of boom spool (4). The bypass circuit is closed by the spool, so the oil from port B pushes check valve (5) open. The oil from port B then flows from port E to the rod end of the cylinder. ! At the same time, the oil at the cylinder bottom end flows from port D to drain port C and returns to the tank. As a result, the boom is lowered. 10-97