STRUCTURE AND FUNCTION ELECTRICAL TRANSMISSION CONTROL ELECTRICAL TRANSMISSION CONTROL Function 10-136 1 Selection of F, R, or N position. Use directional lever 2 Selection of speed range Use speed lever 3 Transmission cut-off function When the left brake is operated, the transmission is returned to neutral. 4 Transmission cut-off selector function This is used to select between actuation and non actuation of the transmission cut-off function. When carrying out scooping work or when loading on a trailer, the left brake pedal can be used to make operations easier than on conventional loaders.
5 Neutralizer function To prevent seizure of the parking brake, the transmission is returned to neutral when the parking brake is applied. 6 Neutral safety function If the directional lever is not at neutral, the engine will not start even if the starting switch is turned to the START position. This prevents accidents if the machine should start suddenly. (For details, see STARTING CIRCUIT) 7 Warning function When the machine is traveling in reverse, the backup lamp lights up and the buzzer sounds to warn people in the surrounding area.