Komatsu — COMBINATION SWITCH

STRUCTURE AND FUNCTION COMBINATION SWITCH Outline ! The directional lever has three positions and the Each switch is positioned by two pins, and is secured to speed lever switch has four positions. As an the body by three screws. When each lever is operated individual part, the switch does not have a detent to the desired position, the switch, which is mechanism; the detent mechanism is in the interconnected by a shaft, acts to allow electric current combination switch.

to flow to that circuit only.- General locations, function 10-137 1 Directional lever switch Switches between F, R, and N 2 Speed lever switch Selects speed range 3 Speed lever stopper Stopper used to prevent speed lever from entering 3rd or 4th during operations 4 Turn signal indicators Direction indicator lamps used when turning left or right 5 Self cancel Turn signal indicator lever automatically returns to central position after machines turns left or right 6 Turn signal indicators Switches on clearance lamp, head lamp, parking lamp, etc.

7 Dimmer switch Selects high beam for travel and low beam for passing 8 Hazard switch Makes both left and right turn signal indicator lamps flash at the same time 9 Emergency flashing pilot lamp Flashes at the same time as the emergency flashing lamp flashes