STRUCTURE AND FUNCTION TRANSMISSION CUT-OFF FUNCTION TRANSMISSION CUT-OFF FUNCTION Outline Operation ! If the transmission cut-off selector switch on the 1. Transmission cut-off selector switch ON main monitor is turned ON (pilot lamp lights up), the ! If the transmission cut-off selector switch is turned transmission cut-off switch installed to the left brake ON, the transmission cut-off relay solenoid is not pedal is actuated. When the left brake pedal is excited, so transmission cutoff relay terminals 3 - 5 operated, the brakes are applied, and the are not connected. In this condition, +24V voltage transmission is shifted to neutral at the same time.
is applied through only the transmission cut-off If the transmission cut-off selector switch is set to the switch to transmission control valve solenoids R OFF position (pilot lamp goes out), the transmission and F. is not shifted to neutral even when the brake is ! When the left brake pedal is depressed, the operated, so the left brake functions only as a brake contacts of the transmission cut-off switch are in the same way as the right brake. opened, so the voltage to solenoids R and F is shut off. As a result, the brakes are applied as normal, and the transmission is also shifted to neutral at the same time. 10-138