TESTING AND ADJUSTING STANDARD VALUE TABLE FOR CHASSIS STANDARD VALUE TABLE FOR ENGINE - In Chassis p For further detailed information, refer to Engine Shop Manual. 20-3 Machine model WA250-3L Engine model Komatsu S6D102E-1 Item Measurement condition Unit Standard value for new machine Service limit value Engine speeds High idle rpm 2650 ± 50 2650 ± 50 Low idle 850 ± 25 850 ± 25 Engine rating Rated gross power / rated speed kW / rpm 101 / 2400 101 / 2400 Intake manifold pressure At T.C. stall and W.O.T (Wide Open Throttle) mm Hg 900-1100 900-1100 Intake air restriction At T.C. stall and W.O.T. at restriction indicator port mm H O 2 New element: 380 Used Element: 635 Max.
635 Lubricating oil pressure with SAE 15W-40 oil & coolant temperature in operating range Minimum at low idle kPa (kg/cm²) 70 (0.70) 70 (0.70) Minimum at rated speed & load kPa (kg/cm²) 276 (2.81) 276 (2.81) Fuel filter inlet restriction Maximum restriction at high idle mm Hg 100 200 Blow-by pressure Coolant temperature in operating range: C Service Tool orifice size: 5.613 mm C At T.C. stall and W.O.T. C With SAE 15W-40 oil mm H O 2 180 360 Exhaust back pressure Maximum at T.C. stall and W.O.T. mm Hg 77 77 Coolant temperature Maximum operating temperature EC 100 100 Valve clearance Engine cold: Intake valves Exhaust valves mm 0.25 0.51 0.25 0.51