TESTING AND ADJUSTING STANDARD VALUE TABLE FOR CHASSIS 20-5 Cate gory Item Measurement Condition Unit Standard value for new machine Service limit value Transmission Valve Priority valve pressure C Torque converter oil temperature: 60-80EC (140- 176EF) C Engine speed: Low idling Mpa (kg/cm 2) 2.3 ± 0.2 (23 ± 2) 2.3 ± 0.2 (23 ± 2) Pilot reducing valve pressure 1.0 ± 0.1 (10 ± 1) 1.0 +0.1, -0.2 (10+1,-2) Clutch pressure 2.3 ± 0.2 (23 ± 2) 2.3+0.3,-0.4 (23+3,-4) Torque converter outlet port pressure 0.38 ± 0.05 (3.9 ± 0.5) 0.38 ± 0.10 (3.9 ± 1.0) Steering wheel Play C Engine speed: Low idling C Machine facing straight to front mm 20 ± 20 Max.
60 Operating Force C Flat, horizontal, straight, dry paved road surface C Hydraulic oil temperature: 45-55EC (113-131EF) C Engine speed: Low idling N (kgf) 9.8 - 12.8 (1.0 - 1.3) Max. 14.2 (Max. 1.5) Low idle Operating time High idle Sec. Max. 5.4 Max. 6.0 2.9 ± 0.3 2.9 ± 1.0 Steering valve Relief pressure C Engine speed: High idle C Hydraulic oil temperature: 45-55EC (113-131EF) Mpa (kg/cm 2) 18.6 ± 0.69 (190 ± 7) 18.6 ± 2.0 (190 ± 20) Brakes Ë2 Operating angle Ë1 C Brake pedal operating force : 206 N (21kg) deg. 18.5 ± 4 18.5 ± 6 48 --- Performance C Flat, horizontal, straight, dry paved road surface C Speed when applying brake: 20 km/h, braking delay:
0.1 sec C Brake pedal operating force: 490 N (40 kg) C Tire inflation pressure: Specified pressure m Max. 5.0 Max. 5.0 Drop in hydraulic pressure C 4.1 Mpa (42 kg/cm 2) in 5 min. Mpa (kg/cm 2) Max. 0.34 (Max. 3.5) Max. 0.34 (Max. 3.5) Wear of disc C Thickness of disc mm 1.0 ± 0.1 Min. 0.6