Komatsu — STANDARD VALUE TABLE FOR CHASSIS

TESTING AND ADJUSTING STANDARD VALUE TABLE FOR CHASSIS 20-7 Cate gory Item Measurement Conditions Unit Standard Value Permissible Value Main control valve Relief pressure C Hydraulic oil temperature: 45 - 55EC C Engine speed: High idle Mpa (kg/cm 2) 20.6 +0.4, -0.5 (210 +4, -5) 20.6 ± 2.0 (210± 2.0) Boom HOLDøRAISE spool operating HOLDøLOWER travel HOLDøFLOAT C Hydraulic oil temp: 45 - 55EC (113-131EF) C Engine speed: Low idle mm 8 --- 8 --- 15.5 --- Bucket HOLDøDUMP spool operating HOLDøTILT travel 7 --- 8 --- Work equipment Work equipment speed Boom lifting time C Hydraulic oil temp: 45 - 55EC (113-131EF) C Engine speed: High idle C Steering valve: Neutral C No load Sec. 5.5 ± 0.3 Max.

7.4 Boom lowering time 3.0 ± 0.5 Max. 4.2 Bucket dumping time w/ Standard bucket cylinder 1.2 ± 0.3 Max. 1.9 Bucket dumping time w/ large bucket cylinder 1.7 Max. 2.4 Bucket At full stroke tilting time standard Bucket horizontal bucket 1.8 ± 0.3 Max. 3.1 1.2 ± 0.3 Max. 1.8 Bucket At full stroke tilting time large Bucket horizontal bucket 2.4 Max. 3.7 1.6 Max. 2.2 Hydraulic drift Retraction of boom cylinder rod C Hydraulic oil temp: 45 - 55EC (113-131EF) C Leave for 5 minutes after stopping engine then measure for next 15 minutes C Bucket empty, boom, bucket horizontal C No load mm Max. 20 Max. 20 Retraction of bucket cylinder rod Max. 17 Max.

20 Proximity switch Clearance of bucket positioner switch C Hydraulic oil temp: 45 - 55EC (113-131EF) mm 3 - 5 --- Clearance of boom kick-out switch 3 - 5 ---