TESTING AND ADJUSTING MEASURING EXHAUST COLOR MEASURING EXHAUST COLOR i When measuring in the field when there is no air or power supply, use smoker the checker; when recording official data, use the smoke meter. Measure with handy smoke checker G1 When measuring the exhaust gas color, be careful not to touch the exhaust pipe or any other high temperature part. i Warm up the engine (oil temperature: 60 E C) before measuring the exhaust gas color. 1) Fit filter paper in tool G1 . 2) Insert the exhaust gas intake port into the exhaust pipe, accelerate the engine suddenly, and at the same time operate the handle to catch the exhaust gas on the filter paper.
3) Remove the filter paper and compare it with the scale provided to judge the condition. Measuring with smoke meter G2 When measuring the exhaust gas color, be careful not to touch the exhaust pipe or any other high temperature part. i Warm up the engine (oil temperature: 60 E C) before measuring the exhaust gas color. 1) Insert the probe into the outlet port of the exhaust pipe, then tighten the clip to secure it to the exhaust pipe. 2) Connect the probe hose, accelerator switch plug, and air hose to tool G2 . i The pressure of the air supply should be less than 1.5 Mpa (15 kg/cm ). 2 3) Connect the power cord to the AC100V outlet.
i When connecting the cord, check first that thepower switch is OFF. fit the filter paper. i Fit the filter paper securely so that the exhaust gas does not leak. 5) Turn the power switch. 6) Accelerate the engine suddenly, and at the same time, depress the accelerator pedal and operate the relief valve to catch the exhaust gas color on the filter paper.. 7) Lay the filter paper used to catch the exhaust gas color on top of unused filter papers (10 sheets or more) inside the filter paper holder, and read the indicated value. 20-15