Komatsu — MEASURING ACCELERATOR PEDAL

TESTING AND ADJUSTING MEASURING ACCELERATOR PEDAL OPERATING ANGLE OF ACCELERATOR PEDAL 1. Measuring 1) Stop the engine. 2) Measure the operating angle when the pedal is operated from the low idling position to the high idling position. Put angle gauge R in contact with the accelerator pedal, and measure operating angle Л ( Л = Л 1- Л 2) when the pedal is operated from low idling position Л 1 to high idling position Л 2. Adjusting 1) Open the inspection cover of the engine hood. 2) Set accelerator pedal (4) to the FREE position (lever (5) in contact with U-bolt (6)), adjust cable (1) so that governor lever (2) is at the low idling position, then tighten nuts (8) and (9).

3) Adjust stopper bolt (10) so that governor lever (2) is at the high idling position when accelerator pedal (4) is depressed. 20-18