TESTING AND ADJUSTING TESTING AND ADJUSTING STEERING WHEEL MEASURING OPERATING TIME FOR STEERING WHEEL i Measurement conditions C Road surface: Flat, horizontal, dry paved surface C Engine water temperature: Within green range on engine water temperature gauge C Hydraulic oil temperature: 45 - 55 E C (113-131 E F) C Tire inflation pressure: Specified pressure C Engine speed: Low and high idle Measurement method 1. Start the engine. i After starting the engine, raise the bucket approx. 400mm and remove the safety bar. 2. Operate the steering wheel (1) to the end of its stroke to turn the machine to the left or right. 3.
Measure the time taken to operate the steering wheel to the end of the stroke to the right (left). i Operate the steering wheel as quickly as possible without using force. i Carry out the measurements both at low idling and high idling, and to both the left and right. 20-28