Komatsu — MEASURING STEERING OIL PRESSURE

TESTING AND ADJUSTING MEASURING STEERING OIL PRESSURE MEASURING STEERING OIL PRESSURE i Measurement conditions C Hydraulic oil: 45 - 55 E C (113 - 131 E F) C Engine speed: High idling METHOD OF MEASURING MAIN RELIEF PRESSURE Loosen the oil filler cap to release the pressure inside the hydraulic tank, then turn the steering wheel several times to release the remaining pressure inside the piping. 1 . Fit safety bar (1) to the frame. 2 . Remove plug (2) for measuring the right turn steering circuit. 3 . Install tool A1 (39.2 Mpa (400 kg/cm )) to the measurement 2 port. 4 .

Start the engine, run the engine at high idling, then turn the steering wheel to the right and measure the pressure when the relief valve is actuated. i To measure the pressure when turning the steering wheel to the left, remove the plug (3)for the left turn steering circuit. 20-29