Komatsu — MEASURING STEERING OIL PRESSURE

TESTING AND ADJUSTING MEASURING STEERING OIL PRESSURE METHOD OF ADJUSTING MAIN RELIEF PRESSURE Always stop the engine before adjusting the pressure. 1. Stop the engine. 2. Remove hose (4) and fitting (5) connected to port T of the priority valve. 3. Loosen lock screw (2), then turn adjustment screw (3) to adjust. i Pressure adjustment for one turn of adjustment screw: Approx. 6.9 Mpa (70 kg/cm ). 2 i Turn the adjustment screw to adjust the set pressure as follows. TIGHTEN to INCREASE pressure. LOOSEN to DECREASE pressure. i Tool 1 for adjusting adjustment screw: Size 7/32 inch, hexagonal i Do not carry out any adjustment if the relief pressure cannot be measured accurately. Adjustment screw:

2.26 - 6.77 Nm (0.23 - 0.69 kgm) Lock screw (6):) 4.7 ± 2 Nm (1.5 ± 0.2 kgm) 20-30