TESTING AND ADJUSTING MEASURING BRAKE PEDAL MEASURING BRAKE PEDAL i Measurement conditions C Engine water temperature: Within white range on engine water temperature gauge C Engine speed: Low idling Operating effort of pedal 1 . Install push gauge ( J ) to the operator’s foot. i Align the center of the push gauge with a point 150 mm from the fulcrum of the pedal. 2 . Start the engine, run at low idling, and measure the operating effort when the pedal is depressed. Travel of pedal 1 . Install push gauge ( J ) to the operator’s foot. i Align the center of the push gauge with a point 150 mm from the fulcrum of the pedal. 2 .
Start the engine and measure the pedal angle when running at low idle with a pedal depressed with a force of 205.9 N (21 kg). 3 . Next, put angle meter ( R ) in contact with the pedal and measure operating angle a from position Л 1 to position Л 2 when the pedal is depressed with a force of 205.9 N (21 kg). i Operating angle Л = Л 1 - Л 2 20-31