TESTING AND ADJUSTING CHECKING FOR ABNORMALITY IN FUEL LEVEL SENSOR CHECKING FOR ABNORMALITY IN FUEL LEVEL SENSOR C If there is a marked difference between the actual amount of fuel remaining in the fuel tank and the display on the fuel gauge (the fuel tank is full but the fuel gauge does not indicate FULL), check the fuel level sensor as an individual part and measure the resistance at the three positions for the float. Measurement Method C Connect one end of the probe of terminal (1), contact the other probe with terminal (2), and measure the resistance. Resistance for fuel level sensor at each point i The resistance values are only given as a guideline.
20-54 FULL (top) ½ (horizontal) EMPTY (bottom) 10 + 1,-3 32 85 +10,0