Komatsu — T-16 EXCESSIVE HYDRAULIC DRIFT OF BOOM

TROUBLESHOOTING T-14, T-15, T-16 T-14 When boom is raised, it moves slowly at a certain height Checks before troubleshooting ! Can any deformation be seen in the boom cylinder? Cause ! Swelling or internal damage to boom cylinder tube i For other abnormalities when the boom is raised, go to "T-13 Boom movement is slow or boom lacks lifting power." T-15 Bucket cannot be pushed with boom cylinder (bucket floats) See "T-13 Boom movement is slow or boom lacks lifting power." Checks before troubleshooting ! Is the oil level in the hydraulic tank correct? ! Is the stroke of the boom spool in the main control valve properly adjusted? Cause !

Defective seating of suction valve at boom cylinder rod end of main control valve ! Oil leakage from boom cylinder piston seal T-16 Excessive hydraulic drift of boom Ask the operator the following questions. ! Did the problem suddenly start? Yes = Dirt caught in valve, broken part ! Did the problem gradually appear? Yes = Worn parts Checks before troubleshooting ! Is the type and level of oil in the hydraulic tank correct? ! Is the boom spool at the HOLD position? Yes = Seized link bushing, defect in spool detent Troubleshooting and Cause ! When measuring the hydraulic drift, is there any sound of oil leakage from inside the boom cylinder? Yes = Defective cylinder packing 20-178 WA250-3L