Komatsu — T-23 EXCESSIVE HYDRAULIC DRIFT OF BUCKET

TROUBLESHOOTING T-21, T-22, T-23 T21 Bucket movement becomes slow during tilt-back operation Checks before troubleshooting ! Can any deformation be seen in the bucket cylinder? Cause ! Swelling or internal damage to bucket cylinder tube ! For other abnormalities when the bucket is operated, go to "T-20 Bucket movement is slow or tilt back lacks power." T-22 Bucket cannot be pushed with bucket cylinder See "T-20 Bucket movement is slow or tilt back lacks power." Checks before troubleshooting ! Is the stroke of the bucket spool in the main control valve properly adjusted? Cause ! Defective seating of safety valve (with suction valve) at bucket cylinder rod end of main control valve !

Oil leakage from bucket cylinder piston seal T-23 Excessive hydraulic drift of bucket Ask the operator the following questions. ! Did the problem suddenly start? Yes = Dirt caught in valve, broken part ! Did the problem gradually appear? Yes = Worn parts Checks before troubleshooting ! Is the bucket spool at the neutral position? Yes = Seized link bushing, defect in spool detent Checking for abnormalities ! Use the Standard Value Table to check if the hydraulic drift of the bucket is actually excessive. Cause ! Oil leakage inside bucket cylinder ! Defective seating of safety valve (with suction valve) at bottom end ! Defective oil tightness of bucket spool 20-182 WA250-3L