Komatsu — TABLE OF ACTION CODES AND FAILURE CODES

TROUBLESHOOTING TROUBLE DATA DISPLAY 4. Action code table Action code: “E 99 +CALL” means that E 99 and CALL are displayed alternately 5. Failure code chart 20-222 WA250-3L Action code Transmission control system Alarm buzzer Action by operator Problem system Action of machine E00 No No Normal operation possible using manual gear shifting E01+C ALL Yes Travel under own power possible, call for service after moving to safe place E03+C ALL Yes Actuate emergency manual spool, open modulation solenoid manually. This action makes it possible to travel under own power.

Call for service CALL Wiring harness on return side of bucket (tilt, dump) solenoid short circuiting with power source Stops auto leveling function, buckets moves, possible that controller is burnt out Yes Stop machine immediately, turn staring switch OFF, then call for service Work equipment control system 40 Bucket dump solenoid system 41 Dump/tilt solenoid system 42 Bucket tilt solenoid system 48 Bucket kickout relay system 50 Auto leveler relay system 52 Boom angle sensor system 53 Bucket angle sensor system