Komatsu — 3. PRECAUTIONS WHEN COMPLETING THE OPERATIONS

DISASSEMBLY AND ASSEMBLY PRECAUTIONS WHEN CARRYING OUT OPERATION 3. Precautions when completing the operations ! If the coolant has been drained, tighten the drain valve, and add coolant to the specified level. Run the engine to circulate the coolant through the system. Then check the coolant level again. ! If the hydraulic equipment has been removed and installed again, add engine oil to the specified level. Run the engine to circulate the oil through the system. Then check the oil level again. ! If the piping or hydraulic equipment, such as hydraulic cylinders, pumps, or motors, have been removed for repair, always bleed air from the system after reassembling the parts.

i For details, see TESTING AND ADJUSTING, Bleeding air. ! Add the specified amount of grease (molybdenum disulfide grease) to the work equipment related parts. 30-8 WA250-3L